Відео

Putting a chain on My Ninja ... Always nice to see this done Right ...1st chain in 50 yrs. ..Shafts & Belts ..🐎💨💨💨Blue Skies 🌙

How often is the oil change suppose to be? New to bikes in general picked up a lightly used 2021 Kawasaki z125 with 115 miles. It’s currently at 135.

07 gsxr 750. When starting the bike the Starter is weak as if there’s not enough power to it. Brand new battery. Still weak. Jumped the starter reply still weak. Completely stump at this point

It's not as easy at the guy does it but trust me just work through it you got it 👍👍

What happens if you don’t use oil for air filter ?

Will this motion pro bearing kit work for bearings like installing crank bearings and transmission bearings in the crank case on dirt bikes to? I notice it says wheel bearing installer but will it do other bearings?

Do you have a video of a 16 pioneer 500 that turns over but doesn’t start???

What about loosening the oil gallery bolts when you intitially start it after you fill it up?

Great info. 2000 rancher here. Starts in occasion with the electric start, on first pull with cord. Seem like the solenoid is clicking every time I try to start it. How likely do I have a bad starter?

🇸🇦👍

I dont have any stabds anymore... trike... i built wood ramps, the left side has 1 less board in it...

My atv 89 kawasaki bayuo is doing same thing so put new carb on and still not running when choke is turned off could it be air mix screw

y de una cbr 400rr??

А направляющие смазать?

👍 now that’s a proper how to video not 20 some minutes of BS 👍🙂

Great video! Thanks for not having a 2 min intro reiterating what the caption already says. Right to the point 😊

literall usless info for someone new aka the persons watching/buying a 300. show where everything is first

I love johns videos, i watch all kinds of the partzilla videos and buy parts through them as well, as im self employed fixing bikes and atvs for a living

How do we reset the power steering light on a 2009 Honda rancher? All ball joints and wheel bearings have been replaced, and everything is tight. I have been told there is a reset procedure.

Good information but please include torque settings, talk about using proper lubrication on pins and anti seize compound on the pin threads. Can't tell you have many calipers I've seen ruined because they were so tight you ended up destroying pins trying to get them to release. Been a bike mechanic for 50 years and this is vital information for people doing it for the first time and being able to do it a second time.

Super simple. This is one reason why it’s on the top of my list for a UTV purchase

your videos have been a big help! I recently put a new clutch on my 400 and this video helped me. I got it together and the clutch was working great shortly after I put a timing chain on. Just reinstalled the clutch after installing chain and now it is not engaging. took it apart and put it back together a few times to see if that makes any difference and it has not. My springs are fine. Clutch disk are in right. Lever feels like it’s engaging but the clutch just isn’t working right. Any idea whats going on?

I lifted the bike, at 10lbs got the one notch deflection and it seems my belt is far too tight. Now I get a groaning noise in turns.

Though underrated, is a 12v, .75amp battery charger capable of charging a 12v, 10amp motorcycle battery? How long should it take to fully charge? Thanks from a novice.

Is that filter good for the 2004 Vulcan Nomad?

Hi John T, I have an issue with my bike that I’m hoping you can help. I have a 2002 Honda VTX 1800R and the issue I’m having SOMETIMES, is the {FI red light}. Normally as you know when you switch the ignition on, the FI light comes on briefly to I believe, inject fuel to start and once the light goes out, I start. Sometimes and it seems to be happening more frequently, turn the key and no FI light at all and headlight & auxiliary lights come on when key on, bike being in neutral w/kickstand up or down and no start. Any ideas what is causing this problem? PS, about a year or so ago, I did attempt to tighten the battery terminals and found them to be tight. Thanks, PJTac

Get a MAGA Republican to speak to it about Christian Nationalism, and threaten to ‘oversee’ the process, it’ll stand no chance. All it needs is some ‘We The People’ types to deal with it, it’s gone

I sure do wish you didn't edit the video and show actually how difficult it is getting that pesky cir clip in place when the piston is on the crank rod. Talk about a pain in the rearend. Folks, it's no where as easy as John Talley makes it in this video.

Thanks for doing this vid. I have a Jap cruiser with a need for this operation.

👍🇸🇦

This motorcycle started life as just and air filter, and everything else was built around it.

I have a 07 grizzly 700. Would the stock Muffler be the best Muffler to put back on it ? I'd like to keep it quiet.

I have a 2003 VTX 1800R and it is different than the one used in the demonstration video.

What year and model of the VTX 1800 is used in this demonstration video?

Working on a Honda CBR300R ABS and BROKE an 8mm screw with the 9ft-lb torque, this video is wrong , I’m gonna try 6.6ft like the other comment stated to see if that works, really disappointed in you Partzilla

Thanks John I found out the problem with the back fires I been having with my k7 gsxr 600 I just did a full service and I found out the one of my spark plug was not gapped currently so the fuel was not getting ignited properly so I replaced them with new ones and it’s working perfectly thanks again!!

I have a couple of these 07-08 grizzly 700 and 450Kodiaks do you have any videos of rebuilding the transmission or could you do one?

Are there any videos of you doing a water pump replacement on a say a 07-08 grizzly?

Yes it does but when it wears off it makes things feel worse.Hope you feel better

Can you tell honda to do a TRX 400 EFI bike. There is NO reason to NOT come out with a new bike... its been 10 years....

getting a new bike next week, deciding between a 2024 GSX-8R or the Kawasaki Z900.. thoughts anyone..

I have a 2004 suzuki and trader VL 1500. When I pushed the starter button the headlight will dim And that's it. I have checked the relay and the starter relay. And I bypass the kickstand switch and clutch which. If I jump the 2 wires going to the starter and the battery. I will be able to get it to start . Can you help me.

Prednisone 😂

🇸🇦👍

It doesn't just slide out like that I've replaced plenty of boots show the people really what they will come up against

I have to disagree that they wear at the same rate. If the front sprocket is 1/3 the size of the rear in tooth count, each tooth sees about 3X the wear of the rear since it sees 3 chain links every rotation rather than one.

I have a 2012 polaris rzr xp 4 900. I have replaced the stator and regulator with oem polaris parts. My question is, should the wires between the stator and regulator be connected in a specific order. All three wire and plugs look the same.

You loosened up the adjusters, do you have to tighten em back up